序号 | 加工程序 | 子序号 | 工序类型 | ||
1 | mill_planar | 平面铣加工模板 | 1.1 | FLOOR_WALL | 底壁铣 |
1.2 | FLOOR_WALL_IPW | 带IPW的底壁铣 | |||
1.3 | FACE_MILLING | 带边界面铣 | |||
1.4 | FACE_MILLING_MANUAL | 手工面铣 | |||
1.5 | PLANAR_MILL | 平面铣 | |||
1.6 | PLANAR_PROFILE | 平面轮廓铣 | |||
1.7 | CLRANUP_CORNERS | 清理拐角 | |||
1.8 | FINISH_WALLS | 精铣壁 | |||
1.9 | FINISH_FLOOR | 精铣底面 | |||
1.10 | GROOVE_MILLING | 槽铣削 | |||
1.11 | HOLE_MILLING | 孔铣 | |||
1.12 | THREAD_MILLING | 螺纹铣 | |||
1.13 | PLANAR_TEXT | 平面文本 | |||
1.14 | MILL_CONTROL | 铣削控制 | |||
1.15 | MILL_USER | 用户定义铣 | |||
2 | mill_contour | 轮廓铣加工模板 | 2.1 | CAVITY_MILL | 型腔铣 |
2.2 | ADAPTIVE_MILLING | 自适应铣削 | |||
2.3 | PLUNGE_MILLING | 插铣 | |||
2.4 | CORNER_ROUGH | 拐角粗加工 | |||
2.5 | REST_MILLING | 剩余铣 | |||
2.6 | ZLEVEL_PROFILE | 深度轮廓铣 | |||
2.7 | ZLEVEL_CORNER | 深度拐角加工 | |||
2.8 | FIXED_CONTOUR | 固定轮廓铣 | |||
2.9 | COUNTOUR_AREA | 区域轮廓铣 | |||
2.10 | COUNTOUR_SURFACE_AREA | 曲面区域轮廓铣 | |||
2.11 | STREAMLINE | 流线 | |||
2.12 | CONTOUR_AREA_NONE_STEEP | 非陡峭区域轮廓铣 | |||
2.13 | COUNTOUR_AREA_DIR_STEEP | 陡峭区域轮廓铣 | |||
2.14 | FLOWCUT_SINGLE | 单刀路清根 | |||
2.15 | FLOWCUT_MULTIPLE | 多刀路清根 | |||
2.16 | FLOWCUT_REF_TOOL | 清根参考刀具 | |||
2.17 | SOLID_PROFILE_3D | 实体轮廓3D | |||
2.18 | PROFILE_3D | 轮廓3D | |||
2.19 | CONTOUR_TEXT | 轮廓文本 | |||
2.20 | MILL_USER | 用户定义铣 | |||
2.21 | MILL_CONTROL | 铣削控制 | |||